Precast Piles & Elements
Trusted mix design, disciplined QC, and coordinated logistics for predictable performance and schedules. Complete range of prestressed concrete piles and precast elements manufactured with modern equipment.
Why Forcecrete Precast Piles
Trusted Mix Design
Engineered concrete mixes with disciplined quality control for predictable performance.
Rigorous QC Process
Material inspections, moisture checks, casting to BS 1881-Part 3, compression & wire-pull testing.
Predictable Schedules
Coordinated logistics ensure project managers get on-time delivery and installation support.
Coordinated Logistics
Platform inspections pre/post pour, instrument calibration, and water-injection curing for piles.
Comprehensive Range
Square, I-shape, and spun piles plus precast elements—all produced with modern equipment.
TIS Certified
Products comply with Thai Industrial Standards and international engineering specifications.
Prestressed Square Piles
Square cross-section piles suitable for a wide range of foundation applications. Benchmark ranges from established suppliers.
| Cross-Section | Typical Length | Safe Load (Approx.) | Typical Applications |
|---|---|---|---|
| 0.18 m | 6.00 - 26.00 m | ~20 ton | Low to medium load foundations |
| 0.25 m | 6.00 - 26.00 m | ~40 ton | Medium load residential and commercial |
| 0.30 m | 6.00 - 26.00 m | ~60 ton | Commercial buildings, warehouses |
| 0.35 m | 6.00 - 26.00 m | ~80 ton | High-rise structures, industrial facilities |
| 0.45 m | 6.00 - 26.00 m | ~110 ton | Heavy industrial and infrastructure projects |
Prestressed I-Shape Piles
I-profile piles offering efficient material use and reduced weight. TIS variants include tabulated section properties and safe-load bands.
| Cross-Section | Typical Length | Safe Load (Approx.) | Typical Applications |
|---|---|---|---|
| 0.18 m | 6.00 - 26.00 m | ~10 ton | Lightweight structures, temporary works |
| 0.25 m | 6.00 - 26.00 m | ~30 ton | Residential foundations, low-rise buildings |
| 0.30 m | 6.00 - 26.00 m | ~50 ton | Commercial construction, medium loads |
| 0.35 m | 6.00 - 26.00 m | ~65 ton | Industrial buildings, warehouses |
| 0.40 m | 6.00 - 26.00 m | ~80 ton | Heavy construction, bridge approaches |
Spun Piles (Centrifugally Cast, Prestressed)
TIS 398-2563 certified. High-speed centrifugal spinning creates dense, low-permeability sections ideal for marine and high-chloride environments.
| Diameter | Typical Length | Concrete Strength | Bearing Capacity | Applications |
|---|---|---|---|---|
| Ø400 mm | 5 - 18 m | ≥500 ksc | Varies by soil | Marine structures, high-chloride environments |
| Ø500 mm | 5 - 18 m | ≥500 ksc | Varies by soil | Coastal construction, waterfront facilities |
| Ø600 mm | 5 - 18 m | ≥500 ksc | Varies by soil | Port facilities, offshore structures |
| Ø800 mm | 5 - 18 m | ≥500 ksc | Varies by soil | Heavy marine loads, deep water foundations |
20-30g Centrifugal Spinning
High-speed spinning creates dense, low-permeability concrete sections with superior strength.
Marine-Grade Durability
Round hollow section suitable for marine and high-chloride environments with excellent corrosion resistance.
Reduced Driving Impact
Hollow section design reduces driving vibration and soil pressure during installation.
TIS 398-2563 Certified
Full compliance with Thai Industrial Standards for centrifugally cast prestressed concrete piles.
Precast Concrete Elements
Modern German machinery with robotic formwork installation for dimensional accuracy, faster installation, and time/cost reductions.
Precast Walls
Load-bearing and non-load-bearing wall panels with dimensional accuracy and fast installation.
Precast Stairs
Ready-to-install stair elements that reduce on-site construction time and improve safety.
Precast Slabs
Floor and roof slabs manufactured with precision for consistent quality and fit.
Precast Beams
Structural beams produced with modern formwork for repeatable accuracy.
Bathroom Slabs
Complete bathroom floor units with integrated waterproofing and drainage.
Custom Elements
Varied shapes and sizes to meet specific architectural and structural designs.
Quality Control Process
Comprehensive quality control from material inspection through final curing ensures consistent, reliable performance.
Material Inspections
Stone, sand, and steel inspected before mixing to ensure material quality
Moisture Control
Pre-mixing moisture checks for consistent concrete properties
BS 1881-Part 3 Casting
Casting procedures follow British Standard specifications
Instrument Calibration
Regular calibration of all testing and production equipment
Compression & Wire-Pull Testing
Strength verification through comprehensive testing protocols
Platform Inspections
Pre and post-pour platform inspections for quality assurance
Water-Injection Curing
Specialized curing process for optimal concrete strength development
Important: Final pile selection, capacity, and detailing must be verified by your structural/geotechnical engineer based on site investigation, load cases, installation method, and governing standards. Published "safe loads" and catalog values are supplier-specific and not interchangeable without engineering review. Contact our engineering team for project-specific requirements.
Ready to Discuss Your Foundation Needs?
Our engineering team is ready to support your project with technical guidance, product selection assistance, and coordinated logistics. Get in touch today.